Filing a claim is easier with good records. We document everything and talk to your adjuster for you.
You get a straight answer on cost up front, with every line explained and nothing hidden.
Certified technicians, professional drying equipment and moisture readings you can see for yourself. No guesswork.
You do not have to work out how bad it is on your own. Call, tell us what you see, and a Bronx technician will explain the next step and what it should cost.
A sheet of drywall behaves much as a wick does. Once the base of a wall gets wet, moisture climbs through the paper and gypsum, commonly a foot or more higher than the water stood on the floor. From the room, the surface may seem dry and sound even though the hidden face and the insulation are saturated. Looks cannot be trusted here, so every wall gets tested with a meter.
A wet wall does not automatically mean demolition. Firm panels wetted by clean water are frequently saved, in some cases with the baseboard taken off and small openings drilled so air can move inside the wall. Walls that are mushy, falling apart, moldy or contaminated get a flood cut instead, where our crew cuts straight across above the damage and takes out whatever sits under that line.
Moisture enters where the panel meets the floor and wicks upward from there. Baseboards and the bottom plate take on moisture.
You may see blistered paint and swollen trim as the damp area moves up the wall. Inside the cavity, the paper face becomes a place mold can begin.
Paper peels from a core that is no longer firm. Insulation slumps inside the wall, odor builds and mold spreads across the hidden back side.
Studs and plates stay wet long enough to grow mold and begin to decay. A far larger section of wall needs tearing out and rebuilding.
It slips beneath the bottom plate and reaches the closet or room on the other side. Our team inspects each wet wall from both sides, plus the floor running beside it.
Mold thrives on the rear face of drywall because it is paper covered, dark and has no moving air. You can have a clean looking painted surface with heavy growth right behind it.
Water in a perimeter wall may reach the sheathing on the far side of the cavity. That layer dries slowly and is checked before the wall is closed.
Outlets and wiring are mounted near the floor, exactly where the water gathers. Until that circuit is inspected, avoid plugging anything into the affected wall.
It depends on the material, how long it stayed wet and how clean the water was. We test before we decide, and we tell you why.
Call (301) 287-5610| Material | Can usually be saved when | Has to be replaced when |
|---|---|---|
| Paint and wallpaper | Finish still tight to the drywall, needing only a fresh coat | Wall coverings that seal water in, plus bubbled or flaking paint |
| Drywall | Clean water, caught early, still hard and flat | Soft, swollen, moldy, or wet from gray or black water |
| Wall studs | Nearly all framing, because sound wood dries in open air | Just sections harmed by rot or severe mold |
| Wall insulation | Closed cell foam that does not absorb water | Soaked batts or blown cellulose that sag and will not dry |
| Baseboards and trim | Solid wood trim that dries flat without splitting | Composite baseboard that puffed up or began to crumble |
Every wall is checked with a thermal camera and moisture meter, and we mark the height and reach of the water, covering the other face and the rooms next door.
Based on the water category, how long it sat and how the drywall feels, we tell you plainly which sections can be dried in place and which need to come out.
Where the drywall stays, the trim is pulled and airflow is sent inside the wall. On sections coming out, a straight flood cut is made and soaked insulation is removed.
Dehumidifiers and air movers stay on, usually 3 to 5 days, until the studs and the drywall left in place test dry. After that comes insulation, new drywall hung and finished, trim put back and paint.
Not seeing your question? Call and ask. It costs nothing to talk it through.
Call (301) 287-5610Take action now and prevent costly damage. Bronx Restoration is ready to help.
Call (301) 287-5610 Now